Removing & Replacing the Battery

To remove and replace the battery, position the A920 to show the backside of the terminal.

Next locate the battery cover and slide the lock slide switch to the right.

The lock slide switch is tightly secured, we recommend that you apply pressure using your finger nails rather than your thumb. Lift the battery cover from the base and pivot the lid upwards and remove.

Next lift the battery from the bottom side and swing it upwards from the bottom and pull out.

To install a battery, first remove the protective cover over the battery connectors. Then insert the battery with the gold connectors towards the top right side.

Slide the battery upwards and then carefully push the bottom into place.

Insert the top of the battery lid into the lid hinges and then lower the bottom of the lid cover until it is flush with the case. Slide the lock slide switch back to the left.